This article will guide you through how to connect AirPods to Mac. Whether you’re pairing them for the first time, reconnecting after a previous pairing, or troubleshooting common issues, this guide ensures you’ll have a smooth experience. We’ll also explore tips to make the most of your AirPods, enhancing your overall audio experience.

How to Connect AirPods to Mac: Step-by-Step Guide

First-Time Pairing

Connecting AirPods to your Mac for the first time is simple but requires following the steps precisely.

1. Access System Settings: Start by clicking the Apple logo in the top-left corner of your screen. From the dropdown menu, select System Settings (or System Preferences on older macOS versions).
2. Enable Bluetooth: In the sidebar, find and click on Bluetooth. Ensure that Bluetooth is turned on by toggling the switch.
3. Prepare Your AirPods: Open the lid of your AirPods case but leave the AirPods inside. Locate the small button on the back of the case and press it until the LED indicator flashes white. This puts the AirPods into pairing mode.
4. Find and Connect AirPods: In the Bluetooth settings on your Mac, you’ll see a list of available devices. Look for your AirPods by name (e.g., “John’s AirPods”). Click the Connect button next to them. A confirmation message will appear once the connection is successful.

Your AirPods are now ready for use with your Mac! They will automatically connect the next time you use them, provided Bluetooth is turned on and the AirPods are nearby.

Reconnecting Previously Paired AirPods

If your AirPods were previously paired with your Mac, reconnecting is even easier. Follow these steps:

1. Open the AirPods case or take the AirPods out of the case to activate them.
2. On your Mac, click the Bluetooth icon in the menu bar.
3. Locate your AirPods in the dropdown list and click on their name to reconnect.

Once reconnected, audio will automatically route to your AirPods. You can adjust settings like volume or noise cancellation directly from your Mac’s Control Center.

Troubleshooting Common Issues

While the pairing process is typically smooth, issues can arise. Here are detailed solutions for common problems:

AirPods Not Appearing in the Bluetooth List

• Solution: Reset your AirPods. Place them in the charging case, close the lid, and wait for 30 seconds. Then open the lid, press and hold the button on the back of the case until the LED flashes amber and then white. Restart your Mac and try the pairing process again.

Frequent Connection Drops

• Possible Causes: Bluetooth interference, low battery, or outdated software can cause frequent disconnections.
• Solution: Ensure there are no physical obstructions between your Mac and AirPods. Check for other devices causing Bluetooth interference and update your macOS and AirPods firmware.

Audio Not Switching Automatically

• Solution: Make sure your AirPods are set as the default audio output device. Go to System Settings > Sound, and select your AirPods under the output tab. If you use the same Apple ID across devices, ensure that automatic device switching is enabled in your iCloud settings.

Low Audio Quality

• Solution: Poor audio quality can be a result of using AirPods in microphone mode during calls. Adjust the audio input/output settings in System Settings > Sound to improve clarity.

Tips for Enhanced Experience

Your AirPods come with several features that can be customized to suit your needs. Here are some tips to get the most out of your AirPods on Mac:

Quick Controls via Control Center

Use the Control Center on your Mac to manage AirPods features effortlessly. From here, you can adjust the volume, switch between noise cancellation and transparency mode (for AirPods Pro or AirPods Max), or check the battery status.

Enable Automatic Ear Detection

This feature allows your AirPods to automatically pause audio when you remove them from your ears and resume playback when you put them back. To enable this, go to Bluetooth Settings, click the Options button next to your AirPods, and toggle on Automatic Ear Detection.

Customize Gestures

Double-tap actions or press-and-hold gestures can be configured to control playback, summon Siri, or adjust noise-canceling settings. Access these options by clicking on your AirPods in Bluetooth Settings.

Switch Devices Easily

If you use the same Apple ID on multiple devices, you can seamlessly switch your AirPods between them. This is especially useful for multitasking between your Mac and iPhone.

Maintaining AirPods for Optimal Performance

To ensure your AirPods deliver the best audio experience and last as long as possible, regular maintenance and proper usage habits are essential.

This section will cover effective cleaning methods, battery management strategies, and safe storage tips to keep your AirPods in excellent condition.

1. Cleaning Your AirPods

Proper cleaning is crucial to maintaining sound quality and hygiene, as AirPods can accumulate dirt, earwax, and dust over time. Follow these safe methods to clean your AirPods without causing damage:

• Cleaning the Earbuds: Use a soft, lint-free cloth slightly dampened with water or isopropyl alcohol (70%). Gently wipe the exterior surfaces, avoiding moisture entry into openings.
• Cleaning the Speaker Mesh: For stubborn dirt in the speaker mesh, use a dry cotton swab or a soft-bristled toothbrush. Avoid sharp objects like pins or paperclips, as they can damage the mesh.
• Cleaning the Charging Case: Wipe the outside of the case with a microfiber cloth. For the interior, use a dry cotton swab to clean the connectors and remove debris. Do not use liquids inside the case.
• Hygiene Practices: Regularly clean your AirPods to prevent buildup. Ensure your ears are clean to minimize residue transfer.

2. Battery Management

The longevity of your AirPods’ batteries depends on how well you care for them. Lithium-ion batteries degrade over time, but with these strategies, you can maximize their lifespan:

• Avoid Overcharging: Remove your AirPods from charging once they reach full capacity. While modern devices are designed to prevent overcharging, prolonged charging sessions can still generate heat, which may reduce battery life.
• Use One AirPod at a Time: For long phone calls or continuous listening, alternating between the left and right AirPods can conserve battery life and keep one charged at all times.
• Enable Optimized Battery Charging: On devices that support it, this feature learns your charging habits and slows the battery’s aging process by delaying full charging until needed.
• Keep Battery Between 20-80%: Avoid completely draining or frequently charging the battery to 100%. Staying within this range minimizes wear.
• Avoid Extreme Temperatures: Exposure to extreme heat or cold can damage the battery. Store and use AirPods in environments between 0°C and 35°C (32°F to 95°F).

3. Storage Tips

Proper storage practices help protect AirPods from physical damage and environmental wear:

• Use the Charging Case: Always store AirPods in their charging case when not in use. This not only protects them from dust and debris but also ensures they remain charged.
• Avoid Dropping or Crushing: Handle the case carefully and avoid placing it in tight pockets or bags where it might get crushed.
• Keep Away from Water: While some AirPods models have water resistance, prolonged exposure to moisture can still cause damage. Avoid storing them in humid areas or near liquids.
• Store in a Safe Place: Keep your AirPods in a designated spot to prevent misplacement. Using accessories like a protective cover for the case can provide added protection against scratches and drops.

Enhance Your Experience with Krisp

Virtual meetings and online calls are now a cornerstone of modern communication. However, background noise can easily derail even the most professional conversations, whether it’s the sound of traffic, a barking dog, or construction outside your window. While AirPods provide excellent audio quality and convenience, pairing them with Krisp, an advanced AI noise-canceling tool, takes your listening and speaking experience to unparalleled heights.

Why Krisp and AirPods Are the Perfect Pair

Krisp is more than a noise-canceling app—it’s a comprehensive solution designed to ensure pristine audio quality. Powered by cutting-edge AI technology, Krisp effectively filters out all kinds of background noises and echoes, allowing your voice to shine through without distractions. Whether you’re working in a busy coffee shop, managing a virtual meeting from home, or catching up with friends on a call, Krisp ensures that your audio is consistently clear and professional.

What sets Krisp apart is its real-time effectiveness. You don’t need to worry about the hum of your air conditioner or the chatter in the next room disrupting your calls. Krisp focuses solely on what matters—your voice—so you can stay confident and focused in any environment.

The Benefits of Krisp’s AI Noise Cancellation

Imagine a world where your productivity isn’t hindered by the sounds of your surroundings. With Krisp, this becomes a reality. User feedback highlights the tool’s significant impact, with 85% of users reporting improved call quality and greater productivity.

For professionals, Krisp ensures that your online meetings are uninterrupted, leaving a lasting impression on colleagues and clients. For casual users, it makes catching up with friends or loved ones more enjoyable and frustration-free. By eliminating the stress of noise interference, Krisp enhances the value of every interaction.

More Than Just Noise Cancellation

Krisp isn’t limited to noise suppression—it’s a versatile tool that redefines how you engage in virtual conversations. As an AI Meeting Assistant, Krisp comes with additional features designed to streamline your workflow:

• Multilingual Transcription and Notes: During meetings, Krisp can transcribe conversations in multiple languages and automatically generate notes. This means you never miss an important point and can fully focus on the discussion without the distraction of manual note-taking.
• Automatic Summaries: After your meetings, Krisp provides concise summaries, saving time and ensuring you have a clear overview of the key takeaways.

These features don’t just enhance communication but also contribute to overall efficiency, making your virtual interactions smoother and more productive.

Seamless Integration for Effortless Use

One of Krisp’s standout advantages is its ability to integrate seamlessly with popular communication platforms like Zoom, Microsoft Teams, Skype, and more. There’s no need to overhaul your existing tools or workflows—Krisp works in the background, complementing your current setup.

When paired with AirPods, Krisp amplifies the benefits of both technologies. You’ll experience clear, uninterrupted communication and a professional edge in all your interactions.Krisp lets you lead business presentations, contribute to brainstorming sessions, or catch up on personal calls with confidence, ensuring your voice comes through loud and clear, no matter your environment.

Final thoughts

Connecting your AirPods to a Mac is a simple process that significantly enhances your audio experience, whether you’re working, learning, or relaxing. By following the straightforward steps outlined in this guide, you can seamlessly pair your AirPods with your Mac and enjoy high-quality sound in minutes.

Beyond the basics, exploring features like automatic switching, audio sharing, and personalized settings allows you to get the most out of your AirPods. Regular maintenance ensures they remain in optimal condition, offering a reliable and immersive audio experience.

For those seeking to elevate their audio setup even further, integrating tools like Krisp brings unmatched clarity and professionalism to virtual meetings and calls.

FAQs

The post How to Connect Airpods to Mac appeared first on Krisp.

Why Do Podcasters Wear Headphones?

Before diving into the recommendations, let’s explore why podcasters wear headphones. The primary reason is to monitor audio quality in real-time. Wearing headphones allows podcasters to:

• Detect background noise or technical issues.
• Ensure proper microphone placement and levels.
• Maintain consistency in audio quality, especially during remote interviews or calls.

Wearing headphones fosters better communication during multi-person podcasts, as hosts can clearly hear each other and adjust their speaking volume accordingly. This is especially crucial when managing remote interviews or integrating live sound effects.

By wearing headphones for podcasting, you can deliver a polished, professional sound—essential for engaging listeners.

Key Features to Look for in Podcasting Headphones

When searching for the best podcast headphones, consider these essential features:

1. Audio Quality High-quality headphones with accurate sound reproduction are a must for podcasting. Look for models that offer balanced sound profiles to hear every detail. A flat frequency response ensures no frequencies are exaggerated, helping you monitor audio naturally.
2. Comfort Level Podcasting sessions can be lengthy, so comfort is crucial. Over-ear headphones with plush ear cushions and adjustable headbands are ideal for prolonged use. Features like lightweight builds and breathable materials further enhance comfort.
3. Noise Isolation Whether you’re recording in a studio or at home, noise isolation helps minimize distractions and keeps you focused on your audio. Active noise-canceling (ANC) headphones are an excellent choice for podcasters working in noisy environments.
4. Microphone Integration While not always necessary, headphones with built-in microphones can be useful for remote podcasting or video calls. Integrated microphones should offer clarity without picking up excessive background noise.
5. Wired vs. Wireless
   • Wired headphones are preferred for their reliable audio quality and zero latency, making them ideal for real-time monitoring.
   • Wireless headphones offer freedom of movement, but ensure they have minimal latency if you opt for this style. Some models include low-latency Bluetooth modes to address this issue.
6. Durability Look for robust build quality to ensure your headphones withstand frequent use. Features like metal frames, reinforced cables, and replaceable parts can extend the lifespan of your investment.

Types of Podcasting Headphones

Understanding the different types of headphones can help narrow your options:

1. Over-Ear Headphones Over-ear models provide excellent sound quality and comfort. They’re a favorite among professionals for their noise isolation and audio accuracy. 
2. On-Ear Headphones On-ear headphones are compact and lightweight but may lack the comfort and noise isolation of over-ear options. However, their smaller size can be advantageous for travel or on-the-go recording.
3. In-Ear Headphones (Earbuds) While less common for podcasting, in-ear headphones can be a good portable solution. Advanced models with multiple drivers offer improved sound quality.
4. Open-Back vs. Closed-Back Headphones
   • Open-back headphones provide a natural soundstage but lack isolation, making them ideal for mixing or editing in quiet environments.
   • Closed-back headphones are better for recording, as they prevent sound leakage and block out external noise.

Top Picks for Podcasting Headphones in 2025

Podcasting headphones come in all shapes, sizes, and price ranges. Below, we expand on our top 11 picks, detailing what makes each one stand out, along with its pros and cons.

1. Best Overall: Audio-Technica ATH-M50x

The Audio-Technica ATH-M50x has long been a staple in the podcasting and audio production world. Its exceptional sound clarity and durable build make it the go-to choice for professionals and enthusiasts alike.

Designed with precision in mind, these headphones deliver a flat frequency response, allowing podcasters to hear their audio exactly as recorded. Their robust construction ensures years of reliable use, even with daily wear. The foldable design makes them portable, and the detachable cables add to their versatility, catering to different studio setups. Whether you are monitoring sound during recording or editing your podcast episodes, the ATH-M50x ensures no audio detail goes unnoticed. It is especially popular for its ability to reproduce both subtle nuances and dynamic ranges, crucial for creating professional-quality podcasts.

Pros:

• Accurate and balanced sound.
• Foldable design for portability.
• Detachable cables for added versatility.

Cons:

• May feel tight for users with larger heads.
• No built-in microphone.

Best For: Professional podcasters seeking studio-grade audio quality. 

Price Range: $$

2. Best Budget Headphones: Sony MDR-7506

A budget-friendly option, the Sony MDR-7506 delivers high-quality sound at an affordable price. These headphones are lightweight, making them ideal for extended sessions. Their durability and sound clarity make them a long-standing favorite among professionals.

The MDR-7506 is known for its detailed sound reproduction, allowing podcasters to catch audio imperfections during recording or editing. The comfortable ear cups are perfect for prolonged use, and the foldable design adds portability. While it lacks modern features like Bluetooth, its reliability and audio precision make it a timeless choice for budget-conscious creators. Additionally, its high sensitivity ensures optimal sound quality even when used with lower-powered devices such as laptops or mobile phones.

Pros:

• Exceptional sound clarity for the price.
• Comfortable and lightweight design.
• Durable build with foldable features.

Cons:

• Lacks modern features like Bluetooth.
• Minimal noise isolation.

Best For: New podcasters or those on a budget. 

Price Range: $

3. Best Wireless Headphones with Mic: Bose QuietComfort 45

The Bose QuietComfort 45 combines premium noise cancellation with wireless convenience, making it a favorite for podcasters on the go. Whether you’re recording in a busy cafe or a home studio, its ANC (Active Noise Cancellation) ensures a distraction-free environment.

The integrated microphone is an excellent feature for remote interviews, providing crystal-clear communication. With up to 24 hours of battery life, these headphones are built for long recording sessions. While they come at a higher price point, their comfort and audio quality make them worth the investment for mobile podcasters. The ability to switch seamlessly between devices adds another layer of convenience, making these headphones ideal for multitaskers.

Pros:

• Industry-leading noise cancellation.
• Long battery life (up to 24 hours).
• Comfortable for extended wear.

Cons:

• Higher price point.
• Slight audio lag compared to wired options.

Best For: Podcasters who prioritize mobility. 

Price Range: $$$

4. Best Wired Earbuds: Shure SE215

Shure’s SE215 earbuds are compact yet powerful, providing great sound isolation in a portable design. They’re perfect for podcasters who need a lightweight option. Featuring a snug fit and replaceable cables, these earbuds are ideal for podcasters who travel frequently.

Despite their small size, the SE215 delivers a detailed sound signature, ensuring clarity during playback. Their sound-isolating design blocks out ambient noise, making them a practical choice for mobile recording. These earbuds also come with a range of ear tip options, ensuring a customized and secure fit for every user. While they’re not as comfortable for long sessions as over-ear headphones, their portability and sound precision make up for this limitation.

Pros:

• Exceptional sound isolation.
• Replaceable cables extend product life.
• Compact and travel-friendly.

Cons:

• Limited bass response.
• Not ideal for prolonged use due to in-ear design.

Best For: Podcasters who need a portable solution. 

Price Range: $$

5. Best for Comfort: Sennheiser HD 560S

Known for its lightweight design and plush ear pads, the Sennheiser HD 560S is ideal for long editing or recording sessions. These open-back headphones are perfect for podcasters who spend hours fine-tuning their audio.

The HD 560S provides a natural and neutral sound profile, ensuring accurate audio reproduction. Its breathable ear cups prevent overheating during extended use, making it one of the most comfortable options available. However, the open-back design means sound leakage can be an issue, making these better suited for quiet environments. The wide frequency response also ensures excellent bass performance and high-frequency clarity, making them a great choice for detailed sound analysis.

Pros:

• Natural sound profile perfect for editing.
• Extremely comfortable for prolonged wear.
• Durable and lightweight build.

Cons:

• Open-back design allows sound leakage.
• Not suitable for noisy environments.

Best For: Long recording or editing sessions. 

Price Range: $$

6. Best for Portability: JBL Quantum 100

Lightweight and compact, the JBL Quantum 100 offers solid sound quality at an affordable price. Its intuitive controls and detachable microphone make it a versatile option for podcasters who value simplicity.

Though primarily marketed for gamers, the Quantum 100 offers a surprisingly balanced audio profile that works well for podcasting. The detachable mic ensures flexibility, while the memory foam ear pads provide adequate comfort for short to medium recording sessions. The headphones are particularly appealing for podcasters who need an affordable, multi-use headset that travels well.

Pros:

• Lightweight and travel-friendly.
• Clear audio for recording.
• Detachable microphone for flexibility.

Cons:

• Limited durability compared to higher-end models.
• Lacks advanced features like ANC.

Best For: Podcasters on the go. 

Price Range: $

7. Best for Versatility: Beyerdynamic DT 770 PRO

With a robust build and exceptional sound clarity, the Beyerdynamic DT 770 PRO is perfect for both recording and editing. Its closed-back design ensures effective noise isolation, making it a reliable choice for professional setups.

Known for their studio-grade performance, these headphones excel in delivering detailed audio across all frequencies. The padded headband and ear cups ensure comfort during long hours of use. While their bulky design may not appeal to everyone, their ability to accurately reproduce sound makes them indispensable for professional podcasters and editors.

Pros:

• Durable construction.
• Excellent sound isolation.
• Comfortable for extended use.

Cons:

• Slightly bulky design.
• Non-detachable cable limits flexibility.

Best For: Versatile use in professional settings. 

Price Range: $$

8. Best High-End: Audeze LCD-X

For podcasters seeking unmatched audio quality, the Audeze LCD-X offers premium sound and comfort. These planar magnetic headphones provide incredible clarity, making them ideal for high-stakes editing and production.

The LCD-X delivers an expansive soundstage and unparalleled audio detail, making it the top choice for audiophiles and professionals. While the headphones are heavier than most, their plush ear pads and adjustable headband ensure a comfortable fit. The luxury price tag is justified by their performance, especially for podcasters who require top-tier accuracy and immersion.

Pros:

• Superior sound accuracy.
• Comfortable padding for long sessions.
• Luxurious build quality.

Cons:

• Very high price point.
• Heavy compared to other options.

Best For: Professional podcasters and audiophiles. 

Price Range: $$$$

9. Best Open-Back Option: AKG K240 Studio

Known for their semi-open design, the AKG K240 Studio headphones offer a spacious soundstage perfect for mixing and editing. Their lightweight build ensures comfort, even during extended sessions.

The semi-open design strikes a balance between natural sound reproduction and some level of noise isolation. These headphones are particularly useful for editing in quiet environments, where sound leakage won’t disturb others. Additionally, their affordability and reliability make them a staple for podcasters seeking quality on a budget.

Pros:

• Spacious and natural sound.
• Comfortable and lightweight.
• Affordable price point.

Cons:

• Minimal noise isolation.
• Limited bass response.

Best For: Editing and mixing in quiet environments. 

Price Range: $

10. Best Noise-Canceling: Sony WH-1000XM5

The Sony WH-1000XM5 excels in delivering high-quality audio and effective noise cancellation. Its long battery life and wireless capabilities make it an excellent choice for mobile podcasters.

The XM5’s advanced noise-canceling technology ensures complete immersion, even in noisy settings. The headphones’ sound profile is customizable through the Sony Headphones Connect app, allowing podcasters to tailor their experience. Combined with its sleek design and extended battery life, the XM5 is a top-tier option for podcasters who demand flexibility and convenience.

Pros:

• Industry-leading noise cancellation.
• Clear and balanced sound.
• Long battery life (up to 30 hours).

Cons:

• Expensive compared to alternatives.
• Slightly less durable than other options.

Best For: Recording and editing in noisy environments. 

Price Range: $$$

11. Best All-Rounder: Logitech G Pro X

Balancing performance and price, the Logitech G Pro X features Blue Voice technology for enhanced microphone clarity, making it a great option for podcasting and gaming alike.

The G Pro X offers excellent versatility, with memory foam ear pads ensuring comfort and a detachable mic for added flexibility. While its sound profile is slightly geared towards gaming, its clarity and precision make it a strong contender for podcasting. The robust construction and integrated microphone controls further enhance its appeal for multipurpose use.

Pros:

• High-quality integrated microphone.
• Comfortable memory foam padding.
• Versatile for multiple uses.

Cons:

• Wired-only option.
• Sound profile leans towards gaming rather than studio use.

Best For: Podcasters who want a multifunctional headset. 

Price Range: $$

Krisp: The Perfect Companion for Noise-Free Podcasting

When it comes to creating professional-quality podcasts, crisp and clear audio is non-negotiable. This is where Krisp shines, offering advanced AI-powered noise cancellation to eliminate unwanted background sounds during recording or live calls. Whether you’re working from a busy coffee shop, a home office with kids in the background, or a shared workspace, Krisp ensures your podcast’s audio remains distraction-free.

How Krisp’s Noise Cancellation Works

Krisp uses cutting-edge AI technology to distinguish between your voice and background noises. It filters out sounds like keyboard typing, fan noise, barking dogs, or construction noises in real time. This makes it an ideal tool for podcasters who want professional-grade audio without investing in soundproof studios.

Pairing Krisp with Your Headphones

Using Krisp alongside high-quality headphones enhances your podcasting experience. Here’s how:

• Noise-Free Monitoring: When paired with noise-canceling headphones, Krisp ensures that you not only block out external distractions but also monitor crystal-clear audio during recordings.
• Real-Time Clarity: Krisp works seamlessly with both wired and wireless headphones, allowing podcasters to hear their voice or guest in real time without latency or distortion.
• Compatible with Any Setup: Whether you’re recording solo episodes or conducting remote interviews, Krisp integrates easily with popular podcasting platforms and software like Zoom, Riverside.fm, or Audacity.

Why Podcasters Love Krisp

Podcasters often face unpredictable noise challenges, especially during remote recording sessions. Krisp’s noise cancellation feature provides a hassle-free solution, ensuring your audience focuses solely on your content, not the distractions in your environment. Paired with a good set of headphones, Krisp transforms your podcasting setup into a professional-grade recording environment.

If you’re serious about delivering high-quality podcasts, combining Krisp with your favorite headphones is a game-changer for elevating audio quality while keeping your workflow simple and efficient.

Additional Considerations When Buying Podcast Headphones

Choosing the right podcast headphones involves more than just selecting a brand or model. There are several additional factors that can significantly impact your experience and the lifespan of your equipment. Below are detailed considerations to keep in mind when shopping for podcast headphones.

Warranty and Customer Support

Investing in a pair of headphones is a commitment, and a good warranty provides peace of mind. A reliable warranty ensures that you can get repairs or replacements if your headphones experience issues. Some manufacturers offer extended warranties or optional protection plans, which can be particularly useful for professionals who rely on their gear daily.

Before purchasing, check the manufacturer’s policies for handling warranty claims. Are repairs or replacements free within the warranty period? How easy is it to contact customer support? Reading reviews about the company’s responsiveness can save you frustration down the line.

For podcasters who travel frequently or use their headphones intensively, warranty coverage becomes even more critical. Accidental damage protection, where available, is a bonus worth considering.

Compatibility with Podcasting Equipment

Compatibility is key when integrating your headphones into your podcasting setup. Your headphones need to work seamlessly with your audio interface, mixer, or recording device. For example, many high-impedance headphones require a dedicated amplifier or an audio interface with sufficient output power to perform optimally.

Before buying, consider:

• Connection Type: Does your equipment support a 3.5mm jack, 6.3mm adapter, or USB connection? Some headphones come with multiple cable options for flexibility.
• Latency: If you’re using wireless headphones, ensure they have low latency to prevent audio syncing issues during recording or editing.
• Microphone Integration: If you’re opting for a headset with a built-in microphone, confirm that the mic meets your recording quality standards and integrates well with your software.

Adjustability and Fit

Comfort is paramount when you’re spending hours recording or editing a podcast. Adjustable headbands and swiveling ear cups can greatly enhance comfort and usability. Look for headphones with padding on both the headband and ear cups. Memory foam padding and breathable materials are especially desirable for extended sessions.

For podcasters who wear glasses, certain headphone designs may cause discomfort over time. Adjustable pressure settings or ergonomically designed ear cups can help alleviate this issue.

Additionally, consider headphones with lightweight builds. Heavier models might offer premium sound quality but can cause fatigue if worn for long periods. If possible, test the headphones in-store or read user reviews about fit and comfort.

Spare Parts Availability

Headphones are an investment, and opting for a model with replaceable components can significantly extend their lifespan. Common replaceable parts include:

• Ear Cushions: Over time, ear cushions can wear out or lose their shape. Many manufacturers offer replacements, allowing you to restore your headphones to like-new condition.
• Cables: Detachable cables are a major advantage, as they are often the first component to fail. Some headphones come with multiple cable options (e.g., coiled and straight).
• Headbands: Certain high-end models allow you to replace or repair damaged headbands, ensuring continued comfort and functionality.

Check the availability of spare parts before purchasing. Brands with a strong presence in the professional audio market often have better support for replacement components.

Portability and Storage

If you’re a podcaster who travels frequently, portability and storage become important factors. Foldable headphones or models with a compact carrying case are easier to transport and protect from damage. Look for headphones that include durable cases or pouches as part of the package.

For those who record in multiple locations, lightweight and durable headphones are especially practical. Wireless models can further enhance mobility, though it’s essential to balance convenience with audio quality.

Noise Isolation vs. Noise Cancellation

Deciding between noise-isolating and noise-canceling headphones depends on your recording environment. Noise-isolating headphones physically block out ambient noise through their design, while noise-canceling headphones use technology to eliminate external sounds. For podcasters recording in noisy settings, noise-canceling headphones can provide a significant advantage. However, they may be less critical in a controlled studio environment.

Price vs. Performance

While it’s tempting to opt for the most expensive model, higher price doesn’t always equate to better performance for your specific needs. Evaluate what features matter most to you, such as sound accuracy, comfort, or portability. Many mid-range headphones offer excellent performance without the hefty price tag, making them ideal for beginner or intermediate podcasters.

Final Thoughts

Finding the best headphones for podcasting in 2025 is about balancing your budget with your specific needs. Whether you prioritize audio quality, comfort, or portability, the options listed here will set you up for success. 

Ready to elevate your podcasting game? Choose the right pair of headphones and deliver high-quality audio that keeps your audience coming back for more.

FAQ

The post 10+ Best Headphones for Podcasting in 2025 appeared first on Krisp.

Resetting your AirPods Max can resolve common issues like connectivity glitches or sound inconsistencies, helping restore optimal performance. This guide covers both soft and factory resets, explaining when and how to reset, so you can quickly troubleshoot and enjoy a seamless audio experience with your AirPods Max once again.

When Should You Reset Your AirPods Max?

You should reset your AirPods Max in the following situations:

• Persistent connectivity issues with your Apple devices.
• Audio lag or sound quality problems that affect your listening experience.
• Unresponsiveness or freezing, where the buttons don’t work.
• Firmware updates that don’t resolve performance issues.
• Preparing for a new user by restoring to factory settings.

Types of Resets: Soft Reset vs. Factory Reset

There are two main types of resets for AirPods Max:

Each reset option serves different needs, from quick troubleshooting to full device restoration.

How to Soft Reset AirPods Max (Quick Troubleshoot)

1. Make sure your AirPods Max are charged or connected to power.
2. Press and hold both the Digital Crown and the noise control button simultaneously.
3. Wait until the LED light on the ear cup flashes amber.
4. Release the buttons once the amber light appears.

This quick reset can help resolve minor connectivity or audio issues without erasing your settings.

How to Factory Reset AirPods Max (Complete Reset)

To perform a factory reset on your AirPods Max:

1. Ensure your AirPods Max are charged or connected to power.
2. Press and hold both the Digital Crown and the noise control button at the same time.
3. Keep holding until the LED light on the ear cup flashes white (after flashing amber).
4. Release the buttons when the white light appears.

Related: https://krisp.ai/blog/how-to-factory-reset-airpods/ 

Post-Reset Steps

After resetting your AirPods Max, follow these steps to set them up again:

1. Reconnect to your device – Place the AirPods Max near your iPhone, iPad, or other Apple device. Follow the on-screen prompts to pair.
2. Adjust settings – Open the Bluetooth settings on your device to customize features like noise control and spatial audio.
3. Update firmware – Check for any available firmware updates to ensure optimal performance.
4. Test audio quality – Play music or a video to confirm that the reset resolved any previous issues.

Using Krisp for Improved Audio Quality

For a superior listening experience with your AirPods Max, Krisp’s AI-powered noise cancellation enhances audio clarity by filtering out background noise during calls and virtual meetings. Whether you’re in a busy space or working remotely, Krisp helps maintain focus and ensures clearer, more professional communication.

FAQs

The post How to Reset AirPods Max: The Ultimate Guide appeared first on Krisp.

Can You Really Turn Off AirPods?

It’s a bit tricky—AirPods don’t actually have an on/off switch like traditional headphones. Instead, they’re designed to automatically manage power and connectivity for you. Here’s how it works:

Automatic Power Management

When you put your earbuds back in their charging case, they automatically disconnect from your device and enter a low-power state. This design helps save battery without you needing to turn them off manually. Once you open the case and take them out again, they reconnect quickly.

Disconnecting Without the Case

If you don’t have the charging case nearby, you can still disconnect AirPods from your device:

• Option 1: Turn off Bluetooth on your device. This cuts the connection between the device and the AirPods.
• Option 2: Go to Bluetooth settings on your device, find your AirPods in the list, and tap “Disconnect.” This keeps Bluetooth on for other devices but breaks the connection with your AirPods.

Battery-Saving Tips

While AirPods are built to save power automatically, there are a few more ways to extend battery life:

• Automatic Ear Detection: This feature detects when your AirPods are in your ears and pauses audio when you remove them. Keeping this on can help save battery when you’re not actively listening.

• Single AirPod Use: Using just one AirPod at a time can extend total listening time, as the battery of each AirPod is used individually.
  

Troubleshooting Power Issues

If your AirPods seem to drain battery quickly, there might be a software glitch or connection issue. In this case:

• Reset Your AirPods: Place them in the case, press and hold the setup button on the back until the status light flashes amber, then white. This resets the connection and may help with battery problems.
• Firmware Updates: Check that your AirPods are up-to-date, as firmware updates can improve battery efficiency and connection stability.

So, while you can’t fully “turn off” AirPods, these steps give you control over their battery and connection, helping you get the most out of each charge. 

How to Disconnect AirPods from Your Device

If you need to disconnect your AirPods without putting them in the case, here are some easy ways to do it:

1. Using Bluetooth Settings

• Open your device’s Bluetooth settings (on iPhone, go to Settings > Bluetooth).
• Find your AirPods in the list of connected devices.
• Tap on your AirPods and select “Disconnect.” This keeps Bluetooth on for other devices but stops your AirPods from connecting.

2. Turning Off Bluetooth

• For a quick disconnect, you can turn off Bluetooth entirely.
• On an iPhone or iPad, swipe down from the top right corner (or up from the bottom on older models) to open Control Center, then tap the Bluetooth icon to turn it off.
• This disconnects all Bluetooth devices, including your AirPods, until you turn Bluetooth back on.

3. Using the AirPlay Menu (iOS only)

• Open the Control Center on your iPhone or iPad.
• Tap the AirPlay icon (usually a triangle with circles above it).
• Deselect your AirPods as the audio output, which disconnects them.

4. For Mac Users

• Click the Bluetooth icon in the top-right menu bar.
• Hover over your AirPods in the device list and select “Disconnect.”

How to Save Battery on AirPods When Not in Use

1.Always Use the Charging Case

Place them back in their charging case when you finish using your AirPods. This automatically disconnects them from your device and puts them in a low-power state, helping to preserve battery life.

2.Turn Off Bluetooth on Your Device

Turning off Bluetooth when you’re not using your AirPods prevents them from trying to reconnect, which can drain both the device and AirPods batteries. You can quickly toggle Bluetooth off in Control Center on iOS devices or through settings on Android.

3.Disable Automatic Ear Detection

Automatic Ear Detection lets your AirPods pause playback when you take them out of your ears, but if you’re not using them frequently, turning this feature off can save a bit of battery. You can adjust this in the Bluetooth settings for your AirPods on iOS.

4.Use One AirPod at a Time

If you don’t need stereo sound, use one AirPod at a time while keeping the other in the charging case. This way, you can alternate between them, effectively extending the total listening time by allowing one to charge while using the other.

5.Keep AirPods in Their Case When Not in Use

Even when not connected, AirPods can lose charge if left out of the case, so keeping them stored in the case when not in use is essential for battery conservation.

If you continue to experience problems, consider contacting Apple Support, as hardware issues may require professional assistance.

Troubleshooting Common Issues with AirPods

If you’re experiencing issues with your AirPods, such as battery drain, connection problems, or sound quality issues, here are some troubleshooting tips to help you get them back on track:

1. Battery Draining Quickly

    

• Reset Your AirPods: If your AirPods are draining too fast, resetting them can often fix this. Place them in the case, press and hold the setup button on the back until the status light flashes amber, then white. This will reset your AirPods and may resolve battery issues.
• Turn Off Unused Features: Disabling features like Automatic Ear Detection and Spatial Audio (if available) can help reduce battery usage when not needed.
  

  
  2. Connection Problems

   

• Reconnect via Bluetooth: Go to your Bluetooth settings, find your AirPods, and select “Forget This Device.” Then, place them back in the case, close the lid, wait a few seconds, and reconnect by opening the lid near your device.
• Reset Network Settings (iOS devices only): Sometimes, Bluetooth connectivity issues can be resolved by resetting your device’s network settings. Go to Settings > General > Reset > Reset Network Settings. Note that this will reset Wi-Fi and Bluetooth connections, so you’ll need to reconnect them afterward.
  

  3. Audio Quality Issues (quite AirPods)

• Clean Your AirPods: Dust or earwax buildup on the speaker mesh can reduce sound quality. Clean your AirPods carefully with a soft, lint-free cloth or a cotton swab.
• Disable Audio Features: Features like Noise Cancellation and Transparency Mode (on AirPods Pro) can sometimes cause distortion or sound issues. Try turning them off in your Bluetooth settings to see if it improves the audio quality.

If you continue to experience problems, consider contacting Apple Support, as hardware issues may require professional assistance.

Using Krisp AI for Crystal Clear Audio with Your AirPods

Apple earbuds are convenient and powerful, but background noise can sometimes interfere with call clarity. Krisp AI takes your audio experience to the next level by filtering out unwanted sounds during calls, letting only your voice come through clearly. 

• AI-Powered Noise Cancellation: Krisp uses advanced AI to filter out background noises, allowing only your voice to be heard clearly, regardless of your surroundings.
• Real-Time Noise Removal: With Krisp, background noise is filtered in real-time, so even in loud environments, your voice remains the focus during calls.
• Two-Way Noise Cancellation: Krisp not only removes noise on your side but also cancels noise from the other end of the call, creating a seamless experience for both parties.
• Boosts Productivity in Noisy Spaces: By eliminating distractions, Krisp helps you stay focused and professional, whether you’re on work calls from a café, an open office, or a busy home environment.

FAQs

The post How to Turn Off AirPods: A Step-by-Step Guide appeared first on Krisp.

1. Place them in the charging case with the lid open.
2. Hold the setup button on the back for 15 seconds until the LED flashes amber, then white.
3. Release the button – your AirPods Pro are now reset and ready to reconnect.

Resetting your AirPods Pro is a quick and easy way to solve common issues like connectivity drops, audio glitches, or battery drain. In this guide, we’ll walk you through a simple reset process to get your AirPods Pro performing at its best, ensuring seamless sound and a hassle-free experience.

Why You Might Need to Reset Your AirPods Pro

Resetting your AirPods Pro can be a quick fix for a range of issues, from connectivity problems to battery performance. Here are some common reasons why a reset might help:

• Connectivity Issues: If your AirPods Pro keep disconnecting from your device, or if only one AirPod connects, a reset can refresh the connection and improve pairing stability.
• Sound Quality Problems: Sometimes, audio can become muffled, one-sided, or static-filled. Resetting clears minor glitches and restores balanced, high-quality sound.
• Battery Drain: If you notice that your AirPods Pro battery is draining faster than usual, a reset can help recalibrate the battery settings, giving you more accurate readings and potentially improving battery life.
• Bluetooth Pairing Troubles: When switching between multiple devices or facing issues reconnecting, a reset will remove all stored connections, allowing for a fresh setup with your devices.
• Software Bugs: Occasionally, AirPods Pro may encounter software issues that affect overall performance. A reset clears these bugs and restores default settings, helping everything run smoothly.

Detailed Steps to Reset AirPods Pro

• Step 1. Place AirPods in the Charging Case

Ensure both AirPods Pro are securely placed in the case and leave the lid open.

• Step 2. Access the Setup Button

Find the setup button on the back of the case.

• Step 3. Press and Hold the Button

• Press and hold the setup button for about 15 seconds.
• Watch for the LED light to flash amber, then white, indicating a successful reset.

• Step 4. Reconnect Your AirPods Pro

Close the case, then reopen it near your device to pair again. Follow the on-screen instructions to reconnect.

Related: https://krisp.ai/blog/how-to-factory-reset-airpods/ 

What to Do if Resetting Doesn’t Work

If resetting your AirPods Pro doesn’t resolve the issue, try these additional troubleshooting steps:

• Update Firmware: Check for any available firmware updates through your device’s Bluetooth settings.
• Clean the AirPods and Case: Dust and debris can interfere with connections.
• Look for other reasons: Find out why your AirPods might be quiet 
• Restart Your Device: Power off and restart the device you’re pairing with.
• Contact Apple Support: If issues persist, reach out to Apple Support for further assistance or repairs.

Pairing AirPods Pro with Krisp for Crystal Clear Sound

Using your AirPods Pro with Krisp’s noise cancellation makes a real difference when you want crisp, clear audio in noisy places. Here’s what Krisp brings to the table:

Noise Cancellation Features

• Background Noise Removal: Krisp filters out background sounds like chatter, traffic, or home noise, so you can focus on what matters.
• Echo Cancellation: No more annoying echoes during calls; Krisp keeps your sound smooth and interruption-free.
• Voice Clarity Boost: Krisp makes voices sound sharp and clear, even when there’s noise in the background.

Extra Tools for Productivity

• AI Note Taking: Tired of jotting down notes? Krisp’s AI note-taker does it for you, so you never miss an important detail.
• Real-Time Transcription: Need a quick record of your conversation? Krisp transcribes it in real-time, capturing every word.
• Meeting Summaries: Save time with auto-summaries that wrap up your meetings in a few quick points.

Together, Krisp and your AirPods Pro are the perfect duo for clear audio and hassle-free productivity, wherever you are.

FAQs

The post How to Reset AirPods Pro appeared first on Krisp.

1. Place your AirPods in their case and keep the lid open.
2. Press and hold the setup button on the back of the case until the status light flashes amber, then white.
3. Release the button, and your AirPods will be reset to factory settings.

After resetting, you’ll need to reconnect them to your devices. Read on, if you need more details and step-by-step guidance.

When You Might Need to Reset Your AirPods

Here are some situations when a reset might be just what your AirPods need:

• Connection issues: If your AirPods keep disconnecting or don’t pair smoothly with your devices.
• Audio quality problems: When sound is cutting out, your AirPods are quiet, and the quality isn’t as clear as it used to be.
• Battery issues: If the battery drains faster than expected or isn’t charging properly.
• Preparing for a new user: When you’re selling or giving away your AirPods, a reset clears your settings for a fresh start.

Step-by-Step Guide: How to Factory Reset AirPods

Here’s a more detailed guide to factory reset your AirPods, including tips for each step:

• Step 1: Prepare Your AirPods and Charging Case

Place both AirPods in their charging case, making sure they’re correctly seated and charging.

Open the lid but keep the AirPods inside the case throughout the reset process.

• Step 2: Check Battery Level

It’s best to reset your AirPods when they’re sufficiently charged. If possible, make sure both the AirPods and the case have at least a 50% charge to avoid interruptions.

• Step 3: Find the Setup Button on the Case

Look for the small, circular setup button on the back of your AirPods case. You’ll use this button to initiate the reset.

• Step 4: Hold the Setup Button

With the case lid open, press and hold the setup button. Keep holding it for about 15 seconds until you see the status light flash amber (orange) and then white.

For AirPods Pro and AirPods (2nd gen and above): The status light is on the front of the case.

For AirPods (1st gen): The status light is inside the case, between the AirPods.

• Step 5: Release the Button
  

Once the status light turns white, release the setup button. Your AirPods have now been fully reset to factory settings, which removes any paired devices and restores original configurations.

• Step 6: Reconnect Your AirPods to Your Device

• • For iPhone or iPad: With the case open, hold your AirPods close to your device. You should see a pairing prompt on your screen; follow the instructions to reconnect.
  • For Android or other Bluetooth devices: Go to the Bluetooth settings on your device, select your AirPods from the list, and complete the pairing process.

• Step 7: Test the Connection and Sound Quality
  

After reconnecting, try playing audio or making a call to ensure everything’s working smoothly. This reset should resolve most connectivity or sound quality issues.

Related: https://krisp.ai/blog/how-to-find-airpod-case/ 

Troubleshooting: What If the Reset Doesn’t Work?

If a factory reset didn’t resolve your AirPods issues, here are some additional troubleshooting steps to try:

1. Check Your Device’s Bluetooth Settings

• Go to the Bluetooth settings on your device and “Forget” the AirPods.
• Restart your device, then attempt to pair the AirPods again.

2. Restart Your Device

Sometimes the issue might be with your device rather than the AirPods. Turn off your iPhone, iPad, or other device, wait a few seconds, then power it back on and try reconnecting.

3. Charge the AirPods and Case Fully

Ensure both the AirPods and charging case are fully charged. Connect the case to a power source and let it charge for at least 15 minutes before trying the reset again.

4. Clean the AirPods and Charging Case

Dirt or debris in the charging connectors can sometimes prevent a proper reset. Carefully clean the contacts on both the AirPods and inside the case with a soft, dry cloth.

5. Try Resetting One More Time

If the first reset didn’t take, try holding the setup button a bit longer (around 20 seconds) until the status light flashes amber and white. Sometimes a second attempt does the trick.

6. Update Your Device’s Software

AirPods work best with the latest software. Check if your iOS or Android device has any pending updates, as software updates can solve compatibility or connectivity issues.

7. Contact Apple Support

If nothing works, there may be a hardware issue. Reach out to Apple Support for further help, as they can diagnose more specific issues and may offer a replacement if your AirPods are still under warranty.

Related: https://krisp.ai/blog/are-airpods-waterproof/

Additional Tips: How to Pair Your Reset AirPods

After resetting your AirPods, follow these steps to pair them with your device:

• Pair with an iPhone or iPad

• With the AirPods in the case and the lid open, hold them close to your iPhone or iPad.
• You should see a setup animation pop up on your screen. Tap Connect and follow the on-screen instructions.

• Pair with a Mac

• Go to System Settings > Bluetooth and make sure Bluetooth is on.
• With the AirPods in the case and the lid open, press and hold the setup button until the light flashes white.
• Your AirPods should appear in the list of devices. Select them and click Connect.

• Pair with Android or Other Bluetooth Devices

• Open your device’s Bluetooth settings and make sure Bluetooth is on.
• With the AirPods in the case and the lid open, press and hold the setup button until the light flashes white.
• Look for “AirPods” in the list of available devices and tap to connect.

How to Remove AirPods or AirPods Pro from Your Apple ID

If your AirPods are still linked to your Apple ID, they won’t pair with another Apple ID, so here’s how to remove them:

1. Go to the Find My App

Open the Find My app on your iPhone, iPad, or Mac.

2. Select Devices

In the list of devices, find your AirPods and select them.

3. Remove from Account

• Scroll down to the bottom of the device info page and tap Remove This Device.
• Confirm when prompted, and your AirPods will be unlinked from your Apple ID.

4. Reset and Re-pair if Needed

After removing from your Apple ID, you may need to do a factory reset once more before pairing with a new Apple ID.

Enhance Your Audio Quality with Krisp’s Noise Cancellation

To get the best audio experience on your AirPods, especially during calls or virtual meetings, consider using Krisp’s noise cancellation feature. Here’s how it enhances your audio quality:

1.Block Background Noise

Krisp uses AI to eliminate unwanted background sounds on both ends of a call, so you can hear and be heard clearly, even in noisy environments. It’s perfect for enhancing your AirPods’ performance in busy places like coffee shops or shared workspaces.

2. Improve Focus During Calls

By cutting out distractions, Krisp helps you stay focused on the conversation. Whether you’re attending meetings, taking notes, or just catching up with friends, Krisp ensures that your audio is crisp and clear, making communication more effective.

3. Easy Integration with AirPods

Krisp works seamlessly with AirPods, adding an extra layer of clarity for professionals and remote workers who rely on Bluetooth earbuds. Just enable Krisp during your call, and enjoy high-quality audio with noise-free clarity.

FAQs

The post How to Factory Reset AirPods: A Step-by-Step Guide appeared first on Krisp.

Common Reasons Why Your AirPods Are So Quiet

• Dirty AirPods: Over time, earwax, dust, and debris can accumulate on your AirPods’ speaker grilles, blocking sound and causing them to be so quiet. Even a small obstruction can lead to a significant reduction in volume due to the delicate nature of the grilles.

• Low Volume Settings: Another reason why your AirPods might be so quiet is that the volume settings on your device or AirPods are lower than expected. Multiple volume controls on your device can affect overall output, and features like volume limiting or hearing protection settings might further reduce the maximum volume.

• Bluetooth Connection Issues: A weak or unstable Bluetooth connection can also explain why your AirPods are so quiet. Interference from other wireless devices, distance from the source, or physical barriers can compromise the connection.

1. Check the Volume

If your AirPods are suddenly so quiet, the issue might be simpler than you think. Many people overlook the basics and jump to complex troubleshooting steps when the real problem could be low-volume settings. Start by checking if your device’s volume is turned up. On your iPhone or iPad, use the physical volume buttons on the side to increase the volume. Press the volume up button while your AirPods are connected to make sure it’s affecting the right device.

2. Make Sure Your AirPods Are Charged

If your AirPods are low on battery, they may be so quiet due to reduced volume or other performance issues. To fix this, place your AirPods in their charging case and close the lid. Connect the case to a power source using a Lightning cable or a wireless charger if you have a compatible case. Let them charge for at least 15-30 minutes to ensure they have enough power.

When your AirPods’ battery level is low, the sound output may decrease to conserve power, leading to quieter audio or issues like one AirPod being quieter than the other. Charging your AirPods fully can help restore their sound to normal levels.

Ensuring your AirPods are fully charged is a simple and effective way to resolve issues with low volume. If the battery is low, performance can be affected, so charging your AirPods might resolve why they are so quiet.

3. Clean Your AirPods

Over time, your AirPods can accumulate debris, earwax, and other particles that block the speaker grille, which is a common reason why your AirPods might be so quiet. Regularly cleaning your AirPods is essential to maintain their sound quality and ensure they perform at their best.

Important Note: To prevent your AirPods from becoming quiet over time, it’s essential to clean them regularly. The frequency of cleaning depends on how often you use them and the environments in which they are used. Regular maintenance helps prevent buildup, ensuring consistent audio quality.

4. Modify the Audio Balance

If one of your AirPods is quieter than the other, the issue might be due to an off-center audio balance setting on your device. The audio balance determines how sound is distributed between the left and right AirPods.

If the balance is skewed towards one side, it can cause uneven volume levels.

1. Start by opening the Settings app on your iPhone or iPad. From there, navigate to the Accessibility options where the audio balance settings are located.
2. Scroll down in the Settings app and tap on Accessibility. This menu contains various settings to enhance the user experience, especially for those with specific needs.
3. Within the Accessibility menu, scroll down to find the Audio/Visual option. Tap on it to access settings related to audio output.
4. In the Audio/Visual settings, you’ll find a slider labeled Balance. This slider controls the audio balance between the left and right AirPods. If it’s moved too far to one side, it can cause one AirPod to be quieter than the other. Move the slider to the center position to ensure equal volume in both AirPods.
5. After adjusting the slider, play audio from your device to test your AirPods. Listen carefully to ensure the sound is evenly distributed. If it still feels uneven, fine-tune the slider until the balance is right.

So, if one AirPod is quieter than the other, it might be due to an off-center audio balance. This can disrupt stereo sound and affect your listening experience. To fix it, simply adjust the audio balance slider to the center. This quick adjustment will restore clear and even sound from both AirPods, making your listening much better.

5. Disable Low Power Mode

Low Power Mode on your iPhone or iPad helps extend battery life by reducing performance and background activity. However, this mode can also lower the volume output, including when using AirPods.

When Low Power Mode is on, your device limits features like background app refresh and visual effects to save energy. This can also lower the maximum volume output, making your AirPods quieter than usual. It might also weaken the Bluetooth connection, causing lag or reduced sound quality.

1. Go to the Settings app on your device.
2. Tap on Battery in the menu.
3. If the switch next to Low Power Mode is green, tap it to turn it off.

Turning off Low Power Mode allows your device to function at full power, improving volume output and overall performance. It also strengthens the Bluetooth connection, reducing the chance of audio dropouts or other issues, ensuring your AirPods deliver the best sound quality.

6. Turn Off Headphone Safety Features

Apple’s headphone safety features are designed to protect your hearing by regulating the volume of your headphones, including AirPods. While these features are helpful for preventing hearing damage, they can sometimes limit the volume output.

The Headphone Notifications feature monitors the volume levels of your headphones over time. If you consistently listen to music or other audio at high volumes, your iPhone or iPad may automatically lower the volume and send you a notification. This automatic adjustment can make your AirPods sound quieter than you expect, especially if you frequently listen to audio at high levels. While this is intended to prevent hearing loss, it might not suit everyone’s preferences, particularly if you’re trying to listen to something in a noisy environment.

1. Start by opening the Settings app on your iPhone or iPad.
2. Scroll down and tap Sounds & Haptics. This menu contains settings related to your device’s sound output and vibration feedback.
3. In the Sounds & Haptics menu, tap on Headphone Safety. Here, you’ll find the controls for Headphone Notifications and Reduce Loud Sounds.
4. If you don’t want your iPhone or iPad to automatically lower the volume of your AirPods, you can disable Headphone Notifications. Tap the switch next to Headphone Notifications to turn it off. When the switch is gray, the feature is disabled, meaning your device will no longer automatically reduce the volume or send notifications based on your listening habits.

If you’re concerned about maintaining high audio quality and volume without the limitations imposed by Apple’s safety features, you might want to consider using Krisp. Krisp is a powerful noise-canceling app that works across various devices and platforms, providing a cleaner and clearer listening experience without the need to lower the volume.

How Krisp Outperforms Headphone Safety Features? 

Noise Cancellation vs. Noise Filtering: While many headphones come with active noise cancellation (ANC), which reduces background noise, Krisp takes this a step further by using AI-powered noise filtering. This technology not only cancels out background noise but also differentiates between speech and other sounds, ensuring that only your voice is transmitted clearly during calls or recordings.

Adaptability to Various Environments: Headphone safety features like ANC are often designed for specific environments (e.g., airplanes or offices). Krisp, however, is adaptable to a wide range of environments. It can effectively filter out unwanted noise, whether you are in a bustling café, a noisy home environment, or a crowded office space, offering more consistent audio clarity across different scenarios.

Bidirectional Noise Removal: Traditional headphone safety features typically focus on what you hear. Krisp, on the other hand, removes noise in both directions—eliminating background noise from your surroundings as well as from the other participant’s audio. This ensures clear communication on both ends of a conversation, which is something most headphone safety features don’t offer.

Compatibility with Various Devices: Krisp is software-based and works across multiple platforms, offering noise cancellation for any headset or microphone. This flexibility outperforms hardware-based headphone safety features, which are typically tied to specific devices or models.

7. Reset the Bluetooth Volume on Your AirPods

If you switch your AirPods between devices like your Mac and iPhone, the volume might get out of sync. This easy trick can help fix that:

1. Connect your AirPods to your device and start playing music or any audio.
2. Lower the volume all the way to zero, but keep the music playing.
3. Go to your device’s Bluetooth settings and disconnect your AirPods (don’t forget them, just turn off Bluetooth for a moment). Keep your AirPods in your ears.
4. While your AirPods are disconnected, check if the device’s volume increased. If it did, turn it back down to zero.
5. Turn Bluetooth back on and reconnect your AirPods. Then, turn the volume back up to where you like it.

This process resets the connection and ensures your AirPods and device are in sync, so you get the best sound possible.

8. Adjust Your Music EQ for a Louder Sound

If you want your music to sound louder, you can adjust the equalizer (EQ) settings in the Music app. Different EQ settings can make your music sound louder or change the way it sounds.

Here’s how to do it:

1. Start playing any song in the Music app on your device.
2. Go to the Settings app on your device and tap on “Music.”
3. Tap on “EQ” and try out the different settings.
4. Experiment with the options until you find one that makes your music sound the best to you.

The “Late Night” setting is usually the loudest, but you might find another one that works better for your taste. Just keep in mind that the “Loudness” setting might actually make the loudest sounds softer.

9. Use Krisp for Noise Cancellation

If your AirPods are so quiet, it might be because of background noise interfering with your audio. Using Krisp, a noise cancellation app, can help improve your listening experience by blocking out unwanted sounds. Here’s how Krisp works and how it can enhance your AirPods’ performance:

1. Download and Install Krisp: Start by downloading the Krisp app from their website and installing it on your device.
2. Set Up Krisp as Your Audio Input and Output:  Open the Krisp app, and in the settings, choose your AirPods as the microphone and speaker devices. Then, select Krisp as both the input and output audio device within your meeting or conferencing app. This setup will route all audio through Krisp, applying noise cancellation to both what you hear and what others hear from you
3. Connect Your AirPods: Ensure your AirPods are connected to your device as usual. Krisp will work with your AirPods to provide noise-free audio.

Krisp can significantly reduce background noise, making your AirPods more effective in noisy environments. So, if your AirPods are so quiet due to background noise, using Krisp for noise cancellation allows them to deliver crisp, clear audio, even in noisy settings.

10. Ensure Optimal Fit

The fit of your AirPods Pro can significantly impact sound quality and volume. If the ear tips are too loose or not properly sealed, it can make your AirPods sound quieter.

1. Try Different Ear Tip Sizes:
   • AirPods Pro comes with multiple ear tip sizes. Try each size to find the best fit for your ears.
2. Run the Ear Tip Fit Test:
   • Go to Settings > Bluetooth on your iPhone or iPad.
   • Tap the “i” next to your AirPods Pro, then select Ear Tip Fit Test.
   • Follow the on-screen instructions to test the fit and ensure you’re using the right ear tips for optimal sound.
     

FAQ

The post Why Are My AirPods So Quiet? Here’s What You Can Do appeared first on Krisp.

Losing a valuable item is troublesome, and it can cause a micro heart attack when you want to place your earbuds in the AirPods case but can’t find it. In this article, we will give you a comprehensive guide on how to find your AirPod case, even if it is not a tech-traceable model.

5 Ways to Find Your AirPod Case

1. Use the “Find My” App

If you’ve previously enabled the “Find My” feature on your Apple devices, you can locate your AirPods. While this feature primarily helps find the AirPods themselves, it may also indicate the last known location of the case if your AirPods were inside. 

Step 1: Open the “Find My” App

• On your iPhone or iPad, locate and open the Find My app. 
• You can access it via iCloud.com from any browser.

Step 2: Sign in with Your Apple ID (if necessary)

• If you’re using iCloud from a web browser, sign in using your Apple ID credentials.

Step 3: Select Your AirPods from the Device List

• In the app, tap on the Devices tab at the bottom.
• Scroll through the list of your devices to find your AirPods. Select them to see their last known location on the map.

Step 4: Check the Map for the Location

• The app will show the last location where your AirPods were connected to your device. 
• If your AirPods were inside the case when last used, the location might help you track down the case too.

Note: You can track the case separately only with AirPods Pro 2.

Step 5: Play a Sound (if applicable)

• If your AirPods are still in range and not inside the case, you can tap Play Sound to help locate them by sound. 

Step 6: Look at the Last Known Location

• If your AirPods are offline, the app will display the last known location before they disconnected. 
• This is where you should start looking, retracing your steps to find the case.

Step 7: Mark As Lost (if needed)

• If you cannot find your AirPods or case, use the Mark As Lost feature. 
• This will send notifications if someone else tries to pair with your AirPods, increasing the chances of recovering them.

2. Retrace Your Steps

One of the most reliable ways to locate your AirPod case is by retracing your steps. This method can help you jog your memory and identify where you last used or placed the case. Start by thinking back to the last time you had your AirPods out—whether it was during a commute, at work, or at home.

• Consider Recent Activities: If you were listening to music or taking calls, consider where you last put your AirPods away. Were you at your desk, in your car, or lying on the couch? These clues will narrow down the potential places to search.
• Search Systematically: Once you have a general idea of where the case might be, check those locations in the same order you remember moving through them. Be thorough—check under papers, behind objects, or spaces where your AirPod case could have slipped out of sight.
• Ask Others Around You: If you were with family, friends, or colleagues, ask them if they’ve seen your AirPod case. Sometimes, a fresh perspective can reveal its location faster.

3. Check Common Spots

AirPod cases are small and can easily blend into common environments. Whether you’re at home, at work, or on the go, they tend to slip into the same types of hiding spots. To streamline your search, check these typical locations:

• Work Desk: If you use your AirPods for work, your desk might be the first place to look. The case could be tucked between your computer, under papers, or in a drawer where you might have absentmindedly put it during a meeting.
• Car Cup Holders and Seats: Many AirPod users listen to music or take calls while driving. Your AirPod case might have fallen between the seats, into the center console, or be sitting unnoticed in a cup holder.
• Living Room Couch: If you were relaxing on the couch, your AirPod case might have slipped into the cushions. Thoroughly check between and under the pillows and beneath the couch itself.
• Bags, Pockets, and Jackets: If you were on the go, your AirPod case may have been left in a bag, backpack, or jacket pocket. These are common places where the case can hide for days unnoticed. Be sure to check all compartments, including small side pockets.

More on AirPods: https://krisp.ai/blog/airpod-replacement/ 

4. Use a Bluetooth Tracker

 If you frequently misplace your AirPod case, investing in a Bluetooth tracker like Tile or Apple’s AirTag might be worth investing in. These small devices can easily attach to your AirPod case and help you locate it more quickly using your smartphone.

• How Bluetooth Trackers Work: A Bluetooth tracker pairs with an app on your phone. If you lose your AirPod case, you can open the app to see the tracker’s last location. If the case is nearby, the app will guide you with sound or a map to help you locate it.
• Locate Even When Out of Range: Bluetooth trackers like Tile have a community feature that allows other users to help you locate your lost item. If another Tile user passes near your lost case, the system will notify you of its location.
• Attach the Tracker Securely: Most Bluetooth trackers come with adhesive backs or small keyring attachments that make connecting them to your AirPod case easy. Once attached, you’ll know that the next time your case is misplaced, it won’t be hard to find.

5. Enable “Notify When Left Behind”

For users with newer AirPod models, Apple has introduced a helpful feature called “Notify When Left Behind” in the Find My app. This feature sends a notification to your iPhone when your AirPods are disconnected from the device and left behind in a different location.

• How to Enable the Feature: Open the Find My app on your iPhone, select your AirPods from the device list, and scroll down to find the option for “Notify When Left Behind.” Toggle this feature on, and your phone will send a notification if you move away from your AirPods or their case.
• Customize Safe Locations: You can customize the feature to exclude certain “safe locations” like your home or office. This prevents unnecessary notifications if you leave your AirPods behind in places where you don’t mind them staying.
• Receive Timely Alerts: If you forget your AirPods case at a coffee shop or the gym, the Find My app will immediately send a notification to remind you before you get too far away. This allows you to recover the case quickly without losing track of it for long.

Tips on How to Prevent Losing Your AirPod Case

Tip 1.Designate a Specific Spot

Always store your AirPod case in the same location, such as a drawer, desk, or bag pocket, to reduce the risk of misplacing it.

Tip 2. Use a Bluetooth Tracker

Attach a small Bluetooth tracker like Tile or AirTag to your case. This makes it easy to locate if it gets lost.

Tip 3. Keep It in Your Bag or Pocket

When you’re not using your AirPods, keep the case in a secure pocket or a dedicated section of your bag to avoid misplacing it.

Tip 4. Enable “Notify When Left Behind”

If your AirPods support it, enable this feature in the “Find My” app. You’ll receive a notification if you leave the case behind.

Tip 5. Use a Case with a Keychain Loop

Purchase a protective AirPod case with a keychain or carabiner loop. You can then attach it to your keys, bag, or belt loop for added security.

Tip 6. Stay Mindful When Traveling

Always double-check your belongings when leaving places like coffee shops, gyms, or workplaces to ensure you have your AirPod case with you.

FAQs

The post How To Find AirPod Case: A Complete Guide appeared first on Krisp.

• No, they are not, but some models are water-resistant.

Look into the article for a detailed answer.

This is a common question for anyone who owns or is considering buying a pair of these popular earbuds. Whether you’re caught in the rain, sweating during a workout, or accidentally drop them in water, knowing how well AirPods can handle moisture is essential.

In this article, we’ll explore the water resistance capabilities of different AirPods models, offer practical advice on protecting them, and discuss how you can elevate your listening experience with Krisp’s noise cancellation technology, even in less-than-ideal conditions.

Waterproof vs. Water-resistant: Key Differences

Waterproof means that a device can be fully dipped in water without getting damaged. In Water-resistant implies that a device can withstand some exposure to water, such as splashes or sweat, but is not immune to water damage if exposed to heavy moisture for long periods. 

Commonly, the waterproof and water-resistant properties of a device are classified by an IP(ingress protection) rating. 

An IP rating showcases how durable a device is when exposed to water and dust. Let’s take a look at how Apple AirPods of different models are rated under the IP classification. 

Note: The IP rating comes with 2 numbers: 1st number indicates the dust resistance, while the 2nd one relates to water resistance. If one of the properties is missing, the number is indicated with an X. So, if a device’s rating is IP1X – it reads -” the device is dust resistance and not water resistant.”

*The IPX4 rating indicates that a device is resistant to water splashes from any direction. This means the device can handle exposure to small amounts of water, such as sweat or light rain, without damage.  An IPX4 rating does not mean the device is waterproof; it should not be submerged in water or exposed to heavy water exposure.

Which AirPods are waterproof?

None of the AirPods models are fully waterproof. However, certain models are water-resistant with an IPX4 rating. This means they can withstand splashes of water, sweat, or light rain but should not be submerged in water or exposed to heavy moisture. The water resistant models are: 

• AirPods 3rd Generation

• AirPods Pro 1st Generation

• AirPods Pro 2nd Generation

What Happens If AirPods Get Wet?

If your AirPods get wet, what happens next depends on how much water they were exposed to and which model you have. For water-resistant models like the AirPods Pro or AirPods (3rd Generation), a little sweat or a light sprinkle of rain probably won’t cause any harm. But if they get soaked or submerged, they could be damaged and stop working.

Here’s what to do if your AirPods get wet:

1. Take them out of the water right away.
2. Wipe them down with a soft, dry cloth (microfiber works best).
3. Don’t charge them until you’re sure they’re completely dry. Charging wet AirPods could make things worse.
4. Let them air dry for at least 24 hours. Find a dry, airy spot to help them dry out faster.

How to Protect AirPods from Water Damage

As we have put it, AirPods are not waterproof and cannot be exposed to large volumes of water for longer periods; let’s look through some easy steps to save you money and refrain from the frustration that water damage can cause to your AirPods: 

To protect AirPods from water damage, you should: 

• Get a protective case: A water-resistant case can be a lifesaver, adding extra protection when you’re out and about.
• Avoid water: Do not use your AirPods in heavy rain, by the pool, or during super sweaty workouts. If necessary, consider using covers that help keep water out.
• Dry them off quickly: If your AirPods do get wet, grab a soft, dry cloth and wipe them down immediately. Ensure they’re completely dry before returning them to the charging case.
• Store them safely: When you’re not using your AirPods, keep them in their charging case and store the case in a dry place, away from moisture.
• Clean carefully: When cleaning your AirPods, stick to dry cloths and avoid using liquids.

If you follow these precautions, you will enjoy a longer AirPods life and avoid sudden pausing, low-quality sound, and other annoying problems. 

How To Enhance Your AirPods Experience with Krisp

If you love using your AirPods but want to take your audio experience to the next level, Krisp can help. Here’s how:

• Clearer Calls: Eliminate background noise during calls for crystal-clear conversations.
• Focused Listening: Block out distractions, whether you’re working in a busy space or enjoying music.
• Easy Integration: Krisp works seamlessly with your AirPods for an enhanced audio experience.
• Boost Productivity: Stay focused by minimizing distractions with Krisp.

Let’s compare common AirPods experience on its own and with Krisp’s noise cancellation software.

*Note: AirPods use special technology to block incoming noise. Meanwhile, Krips enhances your experience of using AirPods while participating in calls and virtual meetings. You can choose to cancel background noise from your side and the other speaker’s side to enjoy noise-free, high-quality sound. 

Final Thoughts

When using AirPods, understanding their limitations and taking steps to protect them from water damage is essential. While AirPods are not waterproof, certain models offer some level of water resistance. You can keep your AirPods safe and in good working condition by following simple precautions.

Enhancing your AirPods experience with Krisp’s noise cancellation technology can improve call clarity and focus, making them even more effective in noisy environments. Whether on a call, listening to music, or just trying to concentrate, pairing your AirPods with Krisp ensures you get the best possible audio experience.

Frequently Asked Questions

The post Are AirPods Waterproof? What You Need to Know and How to Protect Them appeared first on Krisp.

There are several reasons why your AirPods might be pausing unexpectedly, and understanding these causes can help you find the right solution.  Here are easy-to-follow solutions that can help you get back to your music, podcast, or call without those annoying pauses. By the end, you’ll have a clear understanding of why your AirPods keep pausing and, more importantly, how to stop it from happening again.

Automatic Ear Detection

Automatic Ear Detection is a feature in AirPods that uses built-in sensors to detect when the AirPods are in your ears. When you insert the AirPods, the sensors trigger the audio to play automatically. When you remove one or both AirPods, the audio pauses. This feature is designed to enhance convenience, allowing you to easily start or stop your audio without needing to manually press any buttons.

However, if the sensors malfunction, they may incorrectly detect that the AirPods have been removed from your ears, causing frequent and unexpected pauses. This can happen due to factors such as dirt or debris covering the sensors, poor fit in your ears, or even sensor calibration issues.

If Automatic Ear Detection is causing issues, you can disable it to prevent your AirPods from pausing unexpectedly. Here’s how to do it:

1. Open the Settings App on your iPhone or iPad.
2. Select “Bluetooth” from the list of options.
3. Find your AirPods in the list of connected devices and tap the (i) icon next to them.
4. Toggle off “Automatic Ear Detection” by sliding the switch to the left.

By disabling this feature, your AirPods will no longer automatically pause when you remove them from your ears, reducing the chances of unexpected pauses. Keep in mind that you’ll need to manually pause and play your audio, but this trade-off can lead to a more stable listening experience if you’re encountering issues with Automatic Ear Detection.

Bluetooth Connectivity Issues

Bluetooth Connectivity Issues can significantly impact the performance of your AirPods, often leading to frequent pauses in your audio. Bluetooth relies on a stable connection between your AirPods and the paired device, such as your iPhone, iPad, or Mac. When this connection is weak or interrupted, it can cause your AirPods to pause unexpectedly.

Bluetooth has a limited range, usually up to 30 feet (about 10 meters). If you move too far from your paired device, the connection can become weak or drop entirely, causing your AirPods to pause.

If you’re experiencing frequent pauses due to Bluetooth connectivity problems, try the following solutions:

1. Stay Close to Your Device: Ensure you’re within the effective range of your Bluetooth connection. Try to stay within 15-20 feet of your device to maintain a strong connection and reduce pauses.
2. Reduce Interference: If possible, move away from other wireless devices or turn off unnecessary Bluetooth gadgets to minimize interference. This can help stabilize your connection and prevent interruptions.
3. Reset the Bluetooth Connection:
   On your device, go to Settings and select Bluetooth.
   • Turn off Bluetooth for a few seconds, then turn it back on. This can help re-establish a more stable connection with your AirPods.
4. Unpair and Re-pair Your AirPods:
   • Go to Settings > Bluetooth on your device.
   • Find your AirPods in the list of devices and tap the (i) icon next to them.
   • Choose Forget This Device and confirm.
   • After unpairing, place your AirPods back in their case, close the lid, and then open it again. Follow the pairing instructions on your device to reconnect them.

By addressing Bluetooth connectivity issues, you can reduce or eliminate the pauses and enjoy a smoother, uninterrupted listening experience with your AirPods.

Crowded Public Spaces

In crowded environments where multiple Bluetooth and Wi-Fi signals overlap, the interference can not only cause your AirPods to pause unexpectedly but also degrade the quality of your audio. Sometimes, even the built-in noise cancellation feature of AirPods isn’t enough to block out all the background noise, making it difficult to enjoy a clear and uninterrupted listening experience.

Steps to Use Krisp for a Noiseless Experience

To enhance your listening experience and block out unwanted noise effectively, you can use Krisp, an advanced noise-canceling app. Krisp works by filtering out background noises from both ends of your call, ensuring a clear and focused audio experience.

Here’s how you can use Krisp with your AirPods

1. Download and Install Krisp
   • Go to the Krisp website or your device’s app store and download the Krisp app.
   • Follow the installation instructions to set up Krisp on your device.
2. Set Up Krisp with Your Audio Device
   • Open the Krisp app and log in or create an account.
   • In the Krisp app, select your AirPods as the microphone and speaker in the audio settings.
3. Enable Noise Cancellation
   • Turn on Krisp’s noise cancellation feature by toggling the switch in the app. Krisp will now actively filter out background noise from your surroundings.
4. Enjoy a Clear Audio Experience
   • With Krisp activated, you should experience fewer distractions from background noise, even in crowded spaces. Whether you’re on a call, listening to music, or participating in a video conference, Krisp ensures that your audio remains clear and focused.

By using Krisp with your AirPods, you can significantly improve your listening experience, even in environments where built-in noise cancellation may struggle to keep up. This combination helps you stay focused and enjoy your audio content without the interference of external noise.

Low Battery

Լow battery levels can cause the AirPods to switch between power-saving modes, which may result in intermittent pauses or even disconnections.

To avoid issues caused by low battery levels, it’s a good idea to keep your AirPods’ battery between 40-80%. Here’s how to manage your battery effectively:

1. Charge Regularly: Make a habit of charging your AirPods regularly, especially before long periods of use, to keep the battery within the optimal range.
2. Monitor Battery Levels: Use your connected device to check the battery status of your AirPods. You can do this by opening the AirPods case near your iPhone or by adding the Battery widget to your home screen.
3. Avoid Draining to 0%: Try not to let your AirPods’ battery drop to extremely low levels before charging, as this can lead to interruptions and reduced battery health over time.
4. Store Properly: When not in use, keep your AirPods in their charging case to ensure they stay charged and ready for your next session.

App-Specific Problems

App-Specific Problems can sometimes be the cause of your AirPods pausing unexpectedly. Some apps may not be fully optimized for use with AirPods, leading to problems such as pauses, audio glitches, or even disconnects.

If you suspect that an app is causing your AirPods to pause, try the following steps to isolate and resolve the issue:

1. Test with Different Apps: Switch to a different streaming app to see if the problem persists. For example, if you’re experiencing pauses on Spotify, try using Apple Music or another app to determine if the issue is app-specific.
2. Update Your Apps: Make sure all your apps are up to date. Developers frequently release updates to improve compatibility and fix bugs that could be causing playback issues with AirPods.
3. Reinstall the Problematic App: If a specific app continues to cause problems, try uninstalling and then reinstalling it. This can resolve any corrupt files or settings that may be causing the issue.
4. Check App Settings: Some apps have their own audio settings that might conflict with AirPods. Explore the settings within the app to see if there are options for adjusting how audio is handled.

Krisp is highly compatible with AirPods and can be a valuable tool if you’re experiencing app-specific audio issues. Krisp works independently of the apps you’re using, providing noise cancellation and audio enhancement directly through its own software. This means that even if a specific streaming app has compatibility issues, Krisp can help ensure that your audio remains clear and uninterrupted.

Software Bugs

If your AirPods are running on old software, they may not be compatible with the latest updates on your devices. Also, bugs can cause miscommunication between your AirPods and the paired device.

To minimize interruptions caused by software bugs, it’s important to keep your AirPods’ firmware up to date and perform a reset if needed.

1. Update Your AirPods Firmware:

• Keep your AirPods connected to your device, place them in their charging case, and plug it into a power source.
• Ensure your iPhone or iPad is nearby with Wi-Fi and Bluetooth enabled. The firmware will update automatically if needed.

• If you want to check the firmware version:
  • Go to Settings > Bluetooth on your iPhone.
  • Tap the (i) icon next to your AirPods.
  • Scroll down to see the firmware version and compare it with the latest version available online

1. Reset Your AirPods to Fix Persistent Issues:

If your AirPods continue to pause despite updating the firmware, a reset might be necessary:

• Forget and Reconnect:
  • In Settings > Bluetooth, tap the (i) icon next to your AirPods and select Forget This Device.
• Perform a Factory Reset:
  • Place your AirPods in their charging case, close the lid, and wait 30 seconds.
  • Open the lid and press the button on the back of the case until the LED light flashes amber, then white. This indicates a factory reset.
• Reconnect:
  • With the case lid open, bring your AirPods close to your device and follow the on-screen prompts to reconnect.
    

Conclusion

By following the easy-to-implement fixes provided in this guide, you can minimize or eliminate those frustrating pauses. In particular, don’t forget the power of tools like Krisp, which can enhance your AirPods experience by providing additional noise cancellation and helping to maintain clear, uninterrupted audio even in challenging environments.

FAQ

The post Why Do My AirPods Keep Pausing? Causes and Easy Fixes appeared first on Krisp.